TRIO2SYS – 1-button roller shutter switch

This switch transmitter is wireless, battery-free and therefore maintenance-free. Completely autonomous, it sends a radio signal thanks to the energy released when one of its buttons is pressed. Switch transmitters can be placed anywhere in the room and changed at will. They can be mounted on a wall using either screws or adhesive tape. This

TRIO2SYS – Double shutter switch

The switch transmitter is wireless, battery-free and virtually flat. Completely autonomous, the switch sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed, with no maintenance required. Combined with a receiver and a light sensor, it can be used to remotely control a range of

TRIO2SYS – White 1-button waterproof switch

TRIO2SYS – Outdoor switch transmitter IP55 EnOcean The switch transmitter is wireless, battery-free and waterproof in its IP55 housing. Completely AUTONOMOUS, the switch sends a radio signal thanks to the energy released when the ON and OFF buttons on the transmitter switch are pressed, with no maintenance required. Combined with a receiver, it can be used

TRIO2SYS – Modular 1-channel LED receiver with EnOcean metering

Modular 1-channel LED receiver with EnOcean counter The switch receiver 1 channel modular is used to receive radio signals from switch transmitters or from EnOcean sensors. Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronics, contactors power or small motors. The receiver switch 1 channel is equipped with the function “ repeater “ as well as as the function “ consumption indicator “. FUNCTIONS : 1-channel 1.5A receiver module EnOcean technology Remote control of lighting/appliances ON/OFF function Supports any type of load Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window

TRIO2SYS – 4-channel modular LED receiver with EnOcean metering

Modular 4-channel LED receiver with EnOcean counter The receiver switch 4 channels modular is used to receive radio signals from transmitters switch or from EnOcean sensors. Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronic, contactors power or small motors. The receiver switch 4 channels is equipped with the function “ repeater “ as well as the function “ indicator of consumption “. FUNCTIONS : 4-channel 1.5A receiver module 4 control channels in 1 single module EnOcean technology Remote control of lighting/appliances ON/OFF function Supports all types of load Up to 32 transmitters can be assigned (switches, presence detectors,

TRIO2SYS – EnOcean dry contact sensor with assistance

EnOcean dry-contact transmitter module The dry-contact transmitter is designed to detect changes in the status of all equipment with a potential-free, normally open (preferred) or normally closed dry-contact output. It enables connection to the EnOcean protocol of all products with On/Off (ON/OFF) status reporting, where it is neither desirable nor possible to connect them by

TRIO2SYS – DIN Rail receiver 1-channel EnOcean 16A

DIN rail receiver 1 channel EnOcean 16A The DIN rail 1-channel 16A receiver is used to receive radio signals from switch transmitters or EnOcean sensors. Designed for switching heavy loads, it can switch resistive loads, incandescent lamps, halogen, fluorescent tubes, ELV halogen lamps with ferromagnetic and electronic transformer, power contactor or small motor. The 1-channel 16A modular receiver

TRIO2SYS EnOcean wall switch 1 button compatible ODACE

Dual EnOcean switch, SCHNEIDER ODACE design The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance. It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room

TRIO2SYS – White 1-button switch

TRIO2SYS EnOcean single switch This switch transmitter is wireless, battery-free and therefore maintenance-free. Completely autonomous, it sends a radio signal thanks to the energy released when one of its buttons is pressed. Switch transmitters can be placed anywhere in the room and changed at will. They can be mounted on a wall using either screws

TRIO2SYS – Double switch White

TRIO2SYS EnOcean dual switch The switch transmitter is wireless, battery-free and virtually flat. Completely autonomous, the switch sends a radio signal thanks to the energy released when the ON and OFF buttons on the transmitter switch are pressed, with no maintenance required. Combined with a receiver and a light sensor, it can be used to