Active Circuit Transmitter and Repeater

The Echoflex Active Circuit Transmitter ERM-DA indicates when a electrical 120V to 277V circuit is active, transmitting an EnOcean standard occupancy profile telegram. The Active Circuit Transmitter (ERM-DA-LV) indicates when a 24V AC/DC electrical circuit is active by transmitting a standard occupancy profile telegram.

Resonate Hand Held Switch

The single and dual Handheld switches are self-powered and communicate wirelessly to linked devices. Each paddle can be linked to different controllers to manage multiple circuits. The switch can serve as a straightforward control device, or be part of a complex multi-input strategy, supporting configurations from 3-way to 20-way switching.

Resonate Wave Switch

The single and dual resonate wave switches are self-powered and communicate wirelessly to linked devices. Each paddle can be linked to different controllers to manage multiple circuits. The switch can serve as a straightforward control device, or be part of a complex multi-input strategy, supporting configurations from 3-way to 20-way switching.

Wall Occupancy Sensor

The ROS wall-mounted sensor that uses passive infrared (PIR) technology to detect occupancy. It uses wireless technology to communicate with Echoflex controllers to efficiently manage lighting and increase energy savings. The ROS occupancy sensor is available in models for wide angle, corner mount and hallway or high-bay end of aisle applications.

Magnetic Contact Sensor

The MC-31 is an easy-to-install, battery-powered sensor that monitors the status of a window or door. When mounted on the inside of a window or door jamb, the MC-31 helps users to capture energy savings in lighting and HVAC control systems by providing passive occupancy detection. It wirelessly transmits the open or closed status of

Eltako Wireless tubular motor, torque 10 Nm, speed 14/min, whisper mode 5/min FRM60M10

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 10 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 466 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless tubular motor, torque 20 Nm, speed 14/min, whisper mode 5/min FRM60M20

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 20 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 526 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless multi sensor in E-Design55 FMS55ESB-

Wireless multi sensor for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. With integrated solar cell and battery CR 1632 (not included in the scope of supply).

Eltako Wireless pushbutton tracker, without wire FTTB

Wireless pushbutton tracker with battery (lifetime 5-8 years). 55 x 44 mm, 15 mm high. Weighs only 20 grams. The wireless pushbutton tracker FTTB has a blue pushbutton to send normal pushbutton telegrams. After opening the housing (grasp into the joint and prise apart), switch the tracker on by shifting the slide switch to the w position. The sensor

Eltako Wireless window/door contact FFKB-

75 x 25 x 12 mm, with battery ­(lifetime 7 years). Magnet 37 x 10 x 6 mm. On opening and closing, the related tele­gram is send twice in short succession. The current status telegram is sent cyclically every approx. 8 minutes. ­Attach by bonding.