WaterSensor eco

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. below pipes, fittings and in the area of washing machines, below bath tubs or dishwashers, in utility rooms or basements). Suitable for water. Description WaterSensor eco is equipped with fibre disks that work as a sensor; it does not require

Omnio window contact 1-channel FK101

The Omnio window contact FK101 1-channel is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens. The window contact FK101 consists of a transmitter module driven by

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

Oil-Water Warning Indicator ÖWU

Application For visual and audible alarms if liquids with a flash point of > 55 °C are detected. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, gearbox oils or hydraulic oils, vegetable oils and transformer oils. Description Alarm unit in wall mounting housing for early detection of

Vacuum leak detector Eurovac

Application Class I vacuum type leak detector according to EN 13160 for safe monitoring of double-walled tanks and single-walled tanks with inner lining for the storage of water-polluting liquids with a flash point > 55 °C as well as AdBlue® (urea solution 32.5 %) according to DIN 70070. The broad voltage range (AC 100–240 V)

CO2 Sensor F

Application For continuous monitoring of the carbon dioxide (CO2) concentration in the ambient air. Application in rooms in which many persons work, study or live and where carbon dioxide levels may consequently be elevated. High concentrations of carbon dioxide in the ambient air reduce the ability of persons to concentrate and perform. Ideal for educational

Temperature and Humidity Sensor FTM TF

The temperature and humidity sensor FTM TF cyclically measures the ambient temperature as well as the air humidity and sends a wireless EnOcean message. Mounting by means of simply placing, gluing, screwing or fixing with cable ties. An integrated photovoltaic cell supplies the required power. An optional battery can be used for application in darker

Temperature Sensor FTM T

Application Determination of the ambient temperature and air humidity at a defined location. Description The temperature sensor FTM T transmits the current ambient temperature via the integrated EnOcean® wireless module to the AFRISOhome gateway. The temperature and humidity sensor FTM TF also transmits the value of the current air humidity. Based on the event message,

Universal Radio Transmitter FTM

Application Monitoring of the switching states of voltage-free contacts. In addition, transmission of ambient temperature. Description The universal wireless transmitter can integrate any device with a voltage-free contact into a building automation system. Examples comprise the alarm relays of heating systems or status messages of alarm systems. The voltage-free contact is supplied with voltage by

WaterControl 01

Application For manually or remotely controlled closing and opening of a water pipe in buildings in response to an event message from the water sensors WaterSensor eco or WaterSensor con. Description WaterControl 01 consists of a shut-off valve and a control unit with power supply and an EnOcean® wireless module. The shut-off valve features a