1 NO contact potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts.* Encrypted wire­less, bidirectional wireless and ­repeater ­function are switchable. Only 0.8 watt standby loss.

Dimmer switch controller for electronic ballast units 1-10 V, 1 NO contact not potentialfree 600 VA and 1-10 V control output 40 mA. With adjustable minimum brightness and dimming speed. With switching operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or

Universal dimmer switch, power MOSFET up to 1200 W. Automatic lamp ­detection. With adjustable minimum brightness and dimming speed. With switching ­operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or wireless pushbuttons. Encrypted ­wireless, bidirectional wireless and repeater

Universal dimmer switch, power MOSFET up to 400 W. Automatic lamp ­detection. With adjustable ­minimum brightness and dimming speed. With switching ­operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or wireless pushbuttons. Encrypted ­wireless, bidirectional wire­less and repeater

Switch actuator for shading elements and roller shutters with 2 channels for two 230 V motors. 2+2 NO contact 4 A/250 V AC, not potential free. Encrypted wireless, bidirectional wireless and ­repeater ­function are switchable. Only 0.8 watt standby loss.

Switch actuator for shading elements and roller shutters for one 230 V motor. 1+1 NO contact 4 A/250 V AC, not potential free. Encrypted wireless, ­bidirectional wireless and repeater ­function are switchable. Only 0.8 watt standby loss.

4-channel impulse switch with integrated ­relay function, 1 NO contact each not ­potential free 4 A/250 V AC. 230 V LED lamps up to 200 W, incandescent lamps 1000 watts. With light scene ­control by PC or ­wireless push­buttons. Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.8 watt standby loss.

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps 2000 watts, 5 selectable operating modes. Encrypted wireless, bidirectional wireless and ­repeater function are switchable. Only 0.8 watt standby loss.

1 NO contact potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts, off delay with switch-off early warning and switchable pushbutton permanent light. Encrypted wireless, bi­directional wireless and ­repeater function are switchable. Only 0.8 watt standby loss.