Eltako Wireles transmitter module with batteries and ­antenna rod. L x W x H: 60 x 46 x 30 mm (dimensions excluding antenna and fixing screws) FSM60B

This wireless transmitter module can be operated by a water sensor FWS60 or a pushbutton and transmits a variety of adjustable wireless telegrams to the Eltako building wireless system. An internal jumper permits selection between 4 operating modes.

Eltako Impulse switch with integr. relay function pure white FSR70S-230V-rw

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts, energy saving lamps ESL up to 200 W. Only 0.8 watt standby loss.

Eltako Wireless actuator Dimmer switch controller FSG71/1-10V

Dimmer switch controller for electronic ballast units 1-10 V, 1 NO contact not potentialfree 600 VA and 1-10 V control output 40 mA. With adjustable minimum brightness and dimming speed. With switching operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or

Eltako Wireless actuator Universal dimmer switch FUD71L/1200W-230V

Universal dimmer switch, power MOSFET up to 1200 W. Automatic lamp ­detection. With adjustable minimum brightness and dimming speed. With switching ­operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or wireless pushbuttons. Encrypted ­wireless, bidirectional wireless and repeater

Eltako Wireless actuator Universal dimmer switch FUD71-230V

Universal dimmer switch, power MOSFET up to 400 W. Automatic lamp ­detection. With adjustable ­minimum brightness and dimming speed. With switching ­operation for light alarm clocks, children’s rooms and snooze function as well as constant light ­regulation and master-slave mode. Also with light scene control by PC or wireless pushbuttons. Encrypted ­wireless, bidirectional wire­less and repeater

Eltako Wireless actuator for shading ­elements and roller shutters, 2 channels for two 230 V motors, 2+2 NO contact 4 A FSB71-2x-230V

Switch actuator for shading elements and roller shutters with 2 channels for two 230 V motors. 2+2 NO contact 4 A/250 V AC, not potential free. Encrypted wireless, bidirectional wireless and ­repeater ­function are switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator for shading ­elements and roller shutters, 230 V FSB71-230V

Switch actuator for shading elements and roller shutters for one 230 V motor. 1+1 NO contact 4 A/250 V AC, not potential free. Encrypted wireless, ­bidirectional wireless and repeater ­function are switchable. Only 0.8 watt standby loss.

Eltako 4 channel wireless actuator Impulse switch with integr. relay function FSR71NP-4x-230V

4-channel impulse switch with integrated ­relay function, 1 NO contact each not ­potential free 4 A/250 V AC. 230 V LED lamps up to 200 W, incandescent lamps 1000 watts. With light scene ­control by PC or ­wireless push­buttons. Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.8 watt standby loss.

Eltako 2 channel wireless actuator Impulse switch with integr. relay function FSR71-2x-230V

2-channel impulse switch with integrated ­relay function, 1 NO contact each ­potential free 16 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps 2000 watts. With light scene ­control by PC or ­wireless pushbuttons. Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator Impulse switch with integr. relay function FSR71NP-230V

Impulse switch with integrated ­relay function, 1 NO contact not ­potential free 16 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps 2000 watts. With light scene ­control by PC or wireless pushbuttons. Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.8 watt standby loss.