e.g. Japan

Multi-sensor: STM 550J

STM 550 Multisensor Module with NFC interface STM 550J enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

EnOcean Wireless CO2, Temperature and Humidity Sensor

Measure the indoor air quality in each room or zone Our wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.

Motion Detector with Illumination Sensor – EMDCJ (OEM)

EMDC Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor. Detected movement and the measured illumination level are communicated wirelessly using EnOcean advertising telegrams according to the EnOcean sensor specification. EMDC

T01 – EnOcean

This is a one-key wireless remote control switch that transmits radio waves through environmental power generation and does not require batteries. This wireless remote control switch uses an energy harvesting wireless module [EnOcean PTM215J] and does not require batteries. It is a palm-sized one-key remote control switch that is ideal for carrying around and transmits

Magnet Contact Sensor – EMCSJ

Batteryless and Wireless Magnet Contact Sensor EMCSJ is an energy-harvesting wireless magnet contact sensor for EnOcean systems. Powered by a solar cell, EMCSJ works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted

STM 429J

Energy harvesting magnet contact transmitter module The extremely power saving RF transmitter module STM 429J from EnOcean enables the realization of wireless magnet contact sensors. Powered by a solar cell it works absolutely maintenance-free.

Multi-sensor: STM 550J

STM 550J enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

Signal Watcher Receiver NE-GW001A

The Japanese company Inaba Denki Sangyo has developed a wireless sensor based on EnOcean technology, allowing easy monitoring of the status of machines and equipment in factories. The Signal Watcher is attached to signal lamps and transmits the following information:Light ON / Blinking / Light OFF Features of the Signal Watcher The Signal Watcher is

Wall Mounted Occupancy Sensor – EOSWJ (OEM)

Wall Mounted Wireless Occupancy Sensor Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical

Ceiling Mounted Occupancy Sensor – EOSCJ (OEM)

Ceiling Mounted Wireless Occupancy Sensor Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and