e.g. USA, Canada

WSS20

Wireless Wall Switch Receiver, White. Available as WSS20-GUZ, WSS20-G9N (No Neutral) and WSS20-N9N (Neutral).

CTL-ENOC-NA

The CTL-ENOC-NA wireless dimming controller works with EnOcean-based lighting control devices that require no batteries or external power. Using the Dim-to-Off capability of an Inventronics LED driver eliminated the need for an ac switch or relay for the easiest possible installation and a completely maintenance-free operation. The CTL-ENOC-NA is powered directly from the always-on auxiliary

Wireless Valve Actuator (Battery Powered)

The Wireless M3 Valve Actuator couples to plunger style valve bodies to adjust the flow rates to radiators in hot water and steam heating systems. The M3 Valve Actuator is typically installed on a valve near the radiator and communicates wirelessly with a control system and temperature sensor to regulate the temperature in the room

Plug-in Controller

The wirelessly controlled ILLUMRA Plug-in Controller responds to self-powered wireless light switches and other ILLUMRA transmitters to provide ON/OFF control of lights and other plug-in devices. The controller may also respond to signals from wireless occupancy sensors to provide automatic control of electrical loads.

2-Gang Self-powered Wireless Light Switch

The 2-Gang Self-powered Wireless Light Switch allows two, three or four light switches to be installed at one location. Further information

wiSTAR Plug-in Switch Module

A simple solution for wireless control through any standard outlet. Controlling lamps and electronics in any room is simple when you use Hubbell Building Automation’s wiSTAR Plug-In Switch Module.

Dual Rocker Wireless Light Switch

Self-powered wireless light switch with dual rocker. Each rocker transmits a different RF signal allowing control of two separate loads from one location. Further information

Hotel Key Card Reader

The new ILLUMRA wireless Key Card Reader automates hotel room energy conservation by disabling HVAC and lighting in unoccupied rooms. The device installs in minutes without wires or batteries, minimizing installation, clean-up and downtime costs. Further information

wiSTAR Self-Powered Wireless Light Sensor With Optional Occupancy Detection

Hubbell Building Automation’s wiSTAR Wireless Light Sensor has built-in solar cells that draw on available ambient light to power itself and can operate for up to 7 days in total darkness.

Single Rocker Wireless Light Switch

Control one light or one group of lights with the Single Rocker Wireless Light Switch. Further information