e.g. USA, Canada

ESRPU/ EDRPU – Wireless Switch (902 MHz)

Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.

EHSMU – HVAC Setback Module (902 MHz)

The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC

LEDDU – LED Zone Controller 0-10V (902 MHz)

The LED controller LEDD uses wireless technology to communicate with other self-powered EnOcean-based products and provides an amazingly simple solution for dimming control of LED lighting. It is directly supplied from the auxiliary 12V supply output of a connected LED driver. The compact size enables flexible installation inside of or next to electrical boxes and

LEDRU – LED Relay Zone Controller 0-10V (902 MHz)

The LED relay zone controller uses wireless technology to communicate with other self-powered EnOceanbased products and provides an amazingly simple solution for dimming control of LED lighting. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.

ELLSU – Light Level Sensor (902 MHz)

EnOcean Light Level Sensor measures and reports the level of available natural light. Used in conjunction with suitable controllers such as EnOcean LEDR and LEDD, it enables implementation of energy saving daylight harvesting control systems.

EOSCU – Ceiling Mounted Occupancy Sensor (902 Mhz)

Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects

EasySens® Wireless Switches Mini

Energy-harvesting wireless switch for adjusting the (dimming) status of lights and blinds. The EasySens® radio technology offers flexible attachment to glass and plasterboard walls using the adhesive pad or screws.

EasySens® SR65-DI

The SR65 DI is a wireless transmitter for the binary status of relay inputs. The status of the digital input is transmitted through radio to corresponding remote controllers in the EnOcean network or can be transferred through a gateway to any BUS network. It is often used as a push signal for night-time temperature reduction

EasySens® SR65 TF

Energy-harvesting wireless cable sensor for measuring temperature in gaseous media in heating, ventilation and air-conditioning systems. The SR65 TF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® SR65 AKF

Energy-harvesting wireless duct sensor for the measurement of temperature in gaseous media of heating, ventilation and air-coditioning systems. The SR65 AKF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.