e.g. USA, Canada

Thermostat Control Board

The MTB1 is a unit mounted HVAC controller. It accepts inputs from a variety of wired and wireless room monitoring components to form a complete room subsystem.

Wireless Motion / Lux Sensor

The M9-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.

Integrated Light Switch

The Magnum Energy line of Wall Switch Receivers work in conjunction with EnOcean-enabled Self-Powered Wireless Lighting Control Products to provide and optimal solution for the retrofit lighting needs. These wireless products combine Magnum’s switching technology with self-powered and wireless technologies, developed and licensed from EnOcean. The Wall Switch Receiver can be installed in place of

Plug-In Switch Module

The Magnum Plug-In Switch Module provides an easy way to save energy and control lighting and appliance loads based on room occupancy. The module simply plugs into any standard wall receptacle and receives wireless signals from Magnum compatible products that tell it when to power on or off.

Wireless Key Card Switch

The wireless key card switch communicates wirelessly with compatible devices in a guest room when a key card is inserted or removed from the slot to determine occupancy.

HVAC Setback Module

The Magnum HVAC Setback Module is a simple way to save energy by switching HVAC units between normal and setback modes. It is low voltage, mounts easily in a typical HVAC enclosure, and communicates wirelessly with Magnum occupancy detection and lighting control products.

1 or 2 Channel Switch

The light switch is a battery-free wireless transmitter that communicates with a wide variety of receivers. Multiple color / finish options available.

Wireless Access Point

Wireless LAN Access Point with ETHERNET interface for use with EnOcean 868 MHz or 902 MHz wireless devices and the MES Venergy UI software.

Automatic Load Control Relay

The Magnum M9-ALCR is a UL 924 listed emergency lighting control device. This device is designed to ensure a “lights on state” during a power outage. The M9-ALCR senses when a power outage occurs and switches on the connected emergency lighting load to full brightness, bypassing any normal lighting switches and dimmer controls.

2 Channel Lighting Relay (UTR-L3)

The M9-UTR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.