e.g. EU, Non-EU Europe, China, Singapure, …

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

EOSDA – Occupancy Sensor Sub Desk

The Sub-desk mounted Occupancy Sensor is detecting when a desk is occupied or vacant based on motion in the space underneath the desk. This device is wireless, and uses a passive infrared (PIR) sensor to detect such motion. The occupancy sensor transmits RF signals to control desk power supply or sends people counting information to

EPACA – EnOcean People Activity Counter (868 MHz)

The ceiling mounted sensor is detecting people motion activity in the sensing range underneath the sensor. The device is wireless and solar-powered, so no batteries are needed under typical light conditions and easiest to mount also in retrofitting.

EOSWA – Wall Mounted Occupancy Sensor (868 MHz)

Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that

EMSIA – IoT Multisensor (868 MHz)

The EnOcean multisensor enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

ETHSA – Temperature & Humidity Sensor (868 MHz)

ETHSx is a wireless temperature & humidity sensor for EnOcean systems. Powered by a solar cell, it works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to verti-cal walls or furniture using

EMCSA – Magnet Contact Sensor (868 MHz)

EMCSA is an energy-harvesting wireless magnet contact sensor for EnOcean systems. Powered by a solar cell, EMCSA works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to windows or door frames or

Eltako Wireless pushbutton tracker, without wire FTTB

Wireless pushbutton tracker with battery (lifetime 5-8 years). 55 x 44 mm, 15 mm high. Weighs only 20 grams. The wireless pushbutton tracker FTTB has a blue pushbutton to send normal pushbutton telegrams. After opening the housing (grasp into the joint and prise apart), switch the tracker on by shifting the slide switch to the w position. The sensor

Eltako Wireless window/door contact FFKB-

75 x 25 x 12 mm, with battery ­(lifetime 7 years). Magnet 37 x 10 x 6 mm. On opening and closing, the related tele­gram is send twice in short succession. The current status telegram is sent cyclically every approx. 8 minutes. ­Attach by bonding.

Eltako Wireless keyswitch, without wire, aluminium/black FSTAP-al/sz

Wireless keyswitch for surface mounting 70 x 70 x 43 mm. Die cast aluminium, black front, protection class IP44. Euro profile cylinder lock with 2 keys. Battery lifetime 3-5 years. No standby loss. No external power supply required, so no connecting wire. An internal 3 V CR2032 battery supplies power for ­several years. To change the battery, open the housing as