e.g. EU, Non-EU Europe, China, Singapure, …

Molex CoreSync Wireless LED Relay Zone Controller (868 MHz)

The LED Relay Zone Controller uses wireless technology to communicate with other wireless, self-powered components. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so the LED Relay Zone Controller can be easily wired out of sight using standard wiring practices. Simply link the module to a CoreSync motion sensor, light sensor, switch

Molex CoreSync Wireless PoE Gateway (868 MHz)

The CoreSync Wireless PoE Gateway enables remote network control of lights, sensors, local dimmers and zone controllers. The CoreSync PoE Gateway enables the integration of EnOcean based devices to be integrated for monitoring and control in the CoreSync system. The Gateway is powered and IP connected via CAT5e or CAT6 UTP cable to the Network Equipment and the CoreSync

Wireless 6-in-1 Air Quality Sensor

LD-AQS/A is a wireless 6-in-1 air quality sensor based on EnOcean protocol, which can detect indoor PM1, PM2.5, PM10, formaldehyde, temperature, humidity, VOC, CO2 content in real time, and can be used with EnOcean IoT gateway. The sensor does not require wiring and needs to be powered by external power supply.

Wireless Noise Sensor

LD-NS/A is designed to measure the noise in the environment. The sensor supports the international EnOcean standard (ISO/IEC14543-3-10) and can be seamlessly interworked with other intelligent building systems (KNX BACnet, etc.). It is usually used with a gateway to check the noise level of the environment. When the noise is too high, the system generates

Wireless PM Sensor

LD-PM/F is designed to measure and report levels of PM1, PM2.5, PM10. This device is wireless, powered by the DC 5-24V line power. The sensor can also be used for smoke detection, with the alarm to achieve smoking alarm. The sensor is small and can be held in place with glue or screws, it will

Wireless Repeater

Wireless repeaters based on EnOcean technology transmit EnOcean wireless signals between sensors and receivers, and are used to solve the problem of relaying signals when sensors are installed out of range, or in complex installation environments. The device communication complies with ISO/IEC 14543-3-1X.

Wireless Door Lock Sensor

Wireless VOC Sensor

EasySens® NOVOS 3 SR x

Energy-harvesting wireless room operating unit in the NOVOS design for the integrated measurement of temperature and relative humidity (rH version) in living and office spaces as well as controls through operating elements such as set point and occupancy button. The device is mounted using the adhesive pad or screws included and transmits its values unidirectionally

EasySens® STC65+ RS485 Modbus

Bidirectional gateway with RS485 Modbus interface for integration of up to 32 EasySens® devices. Freely programmable 32 channels allow for a bidirectional communication with 32 addresses (registers) and SAB+/SAB05 wireless valve actuators for example. The STC65+ RS485 Modbus includes an ext. transmitting/receiving antenna (2.5 m).