e.g. EU, Non-EU Europe, China, Singapure, …

NODON EnOcean dual switch micromodule

Micromodule 2 EnOcean loads The NodOn® flush-mounted module can be controlled via an EnOcean®-compatible home automation system, or directly via other EnOcean® controllers such as the Soft Remote, wall switch or NodOn® card reader. Mounted behind your existing wired switch or in the ceiling, the NodOn® flush-mounted module makes it very easy to make your

ENOCEAN EnOcean Pi 868MHz RF module

Connect your Raspberry Pi to the EnOcean world! The EnOcean Pi board is an extension board that connects directly to the GPIO connector on a Raspberry Pi board, creating an EnOcean gateway. It is powered directly by the Raspberry Pi board and therefore requires no external power supply. The system is based on TCM 310

Presence detector, DALI, EnOcean®, master, 12 m, flat, for flush mounting, white

Presence detector, DALI daylight control for flush-mounting in ceilings of 2.4 – 3 m. Standalone or as master combinable with a maximum of 10 secondary detectors and can be controlled via EnOcean. For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones, and

Base for a wireless dimmer switch, 71 x 71 mm, screw fixing

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), blue grey coated

This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®. Conveniently control various lighting points.

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. Examples are Niko presence detectors with an EnOcean® interface (350-41680, 350-41780, 350-41781). No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a

Presence detector, DALI, EnOcean®, master, 24 m, IP54, for flush mounting, white

This presence detector (DALI daylight control, master) is designed for flush-mounting in ceilings of 2.4 – 3m with integrated EnOcean® receiver. Standalone or as master combinable with a maximum of 10 secondary detectors. All-in-one detector installed in a quick and flexible manner thanks to the addressable DALI bus. Manual control is possible via push button

Presence detector, DALI, EnOcean®, master, 24 m, IP54, for surface mounting, white

This presence detector (DALI daylight control, master) is designed for surface-mounting on ceilings of 2.4 – 3m with integrated EnOcean® receiver. Standalone or as master combinable with a maximum of 10 secondary detectors. All-in-one detector installed in a quick and flexible manner thanks to the addressable DALI bus. Manual control is possible via push button

EnOcean Bridge

The autaniNet/EnOcean Bridge acts as a gateway between devices using the EnOcean wireless standard and Autani EnergyCenter devices communicating wirelessly using Zigbee. By linking autaniNet and EnOcean devices, the user reaps the benefits of both worlds—the convenience of EnOcean’s self-powered capabilities and the increased functionality of the much larger wireless range that Autani provides. The

SW14-080-RFH8

Wireless Operator Keypad – One Position Operating frequency 868MHz for the European market Wooble Mushroom Button 90mm – Black Body in thermoplastic material