e.g. EU, Non-EU Europe, China, Singapure, …

KNX/EnOcean Gateway – EG/A 32.2.1

The EnOcean gateway establishes a connection between KNX and EnOcean devices and allows bidirectional transmission of signals and telegrams. It has 32 channels and up to 5 EnOcean devices per channel. Please find here further information: www.abb.com/knx

Decorator-style Wireless Light Switch Dual Rocker

Self-powered wireless light switch with dual rocker. Each rocker transmits a different RF signal allowing control of two separate loads from one location. Further information

EnOcean Easyclickpro aerial module for DIN-rail system

The bidirectional Easyclick aerial module receives all signals from Easyclick transmitters and repeaters inside its range. These are then rerouted via an RS485 interface to the Easyclick DIN-rail modules. The Easyclick modules are linked to each other with modular plug-in cables. Up to 128 modules can be connected to the RS485 bus. If required, also more

EnOcean Easyclickpro module JR, 4-channel, 2 HP, for 2 blinds/shutters

The EnOcean Easyclick JR module for 2 blinds/shutters receives its telegrams via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick JR module is used to regulate blinds/shutters based on a range of

EnOcean Easyclickpro module Switching, 2-channel, 16A, 2 HP

The EnOcean Easyclick switching module receives its telegrams via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick switching module is used to switch lights and other electrical consumers based on a range

EnOcean Easyclickpro module Switching with power supply, 4-channel, 4 HP

The EnOcean Easyclick switching module receives its telegrams via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick switching module unit is fitted with its own voltage supply and can therefore be linked with modular plug-in cables to additional Easyclick modules like e.g. dimming, JR,

EnOcean Easyclickpro Valve actuator, batteryless

Wireless and batteryless radio valve actuator with integrated EnOcean radio interface for bidirectional communication with control and regulation units. The actuator has an integrated temperature sensor and can be used as an independent temperature controller as an alternative to actuator operation. The batteryless actuator uses the heat of the water in the radiator to generate energy.

EnOcean Wireless CO2, Temperature and Humidity Sensor

Measure the indoor air quality in each room or zone Our wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.

EnOcean Easyclickpro plug through adapter SCHUKO, 1-channel, with energy metering

Easyclickpro plug through switch, bidirectional, 1-channel with energy meter (SCHUKO®) The bidirectional Easyclick plug through receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. An integrated energy meter (energy measuring

EnOcean Easyclickpro flush-mounting receiver for blinds/shutters, with mounting plate, with position detection

In addition to the bidirectional functions, the Easyclick receiver variant features position detection that can record and acknowledge the running times of shutters and blinds. Positions can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The running times of the receivers are synchronised automatically when they reach their UP/DOWN end positions.