e.g. EU, Non-EU Europe, China, Singapure, …

Vacuum leak detector Eurovac

Application Class I vacuum type leak detector according to EN 13160 for safe monitoring of double-walled tanks and single-walled tanks with inner lining for the storage of water-polluting liquids with a flash point > 55 °C as well as AdBlue® (urea solution 32.5 %) according to DIN 70070. The broad voltage range (AC 100–240 V)

Oil-Water Warning Indicator ÖWU

Application For visual and audible alarms if liquids with a flash point of > 55 °C are detected. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, gearbox oils or hydraulic oils, vegetable oils and transformer oils. Description Alarm unit in wall mounting housing for early detection of

WaterSensor eco

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. below pipes, fittings and in the area of washing machines, below bath tubs or dishwashers, in utility rooms or basements). Suitable for water. Description WaterSensor eco is equipped with fibre disks that work as a sensor; it does not require

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

Akktor Facility Automation

Control software for lighting, blinds and room temperature, for smart metering and for complex heating systems.

WaterControl 01

Application For manually or remotely controlled closing and opening of a water pipe in buildings in response to an event message from the water sensors WaterSensor eco or WaterSensor con. Description WaterControl 01 consists of a shut-off valve and a control unit with power supply and an EnOcean® wireless module. The shut-off valve features a

Omnio wall mounted transmitter 4-channels WS-102

The Omnio wall mounted transmitter 4-channels WS-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line. To install with screws or adhesive foil. Optional mounting plates allow mounting in different combinations.

Omnio Key-Card-Switch 1-channel KSM

The Omnio key card switch 1-channel KSM is a self-powered and maintenance-free radio transmitter. It can be used as a main switch for lighting, heating and blinds in hotel-, school- and conference rooms as well as in offices. To fix with screws or adhesive pad.

WaterSensor con

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. in the area of fittings washing machines, coffee makers with water connection, etc.). Suitable for water. Description WaterSensor con features a conductivity sensor at the bottom. The energy required to send an EnOcean® telegram is generated by means of an

Omnio handheld transmitter 4-channels R101

The Omnio handheld transmitter 4-channels R101 is a universally applicable battery-less and maintenance-free wireless switch with four independent individual keys. Due to its highly ergonomic shape it rests comfortably in ones hand. The power comes from a small energy converter based on the induction principle.