e.g. EU, Non-EU Europe, China, Singapure, …

Omnio DIN rail mounted switching actuator 4-channels REGS12/04

The Omnio DIN rail mounted switching actuator 4-channels REGS12/04M is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled

Omnio flush-mounted switching actuator 2-channels UPS230/12

The Omnio flush-mounted switching actuator 2-channels UPS230/12 is a device for switching electrical loads. Its two potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25),

Omnio DIN rail mounted switching actuator 8-channels REGS12/08

The Omnio DIN rail mounted switching actuator 8-channels REGS12/08M is a device for switching electrical loads. Its eight potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled

Omnio wall mounted transmitter 4-channels WS-VE-110

The Omnio wall mounted transmitter 4-channels WS-VE-110 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position. The shiny white surface and the compact construction emphasises the classy design. Its white and perfectly even reverse side is coated with a transparent enduring adhesive foil and therefore is predestined to be

Oil-Water Warning Indicator ÖWU

Application For visual and audible alarms if liquids with a flash point of > 55 °C are detected. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, gearbox oils or hydraulic oils, vegetable oils and transformer oils. Description Alarm unit in wall mounting housing for early detection of

WaterSensor eco

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. below pipes, fittings and in the area of washing machines, below bath tubs or dishwashers, in utility rooms or basements). Suitable for water. Description WaterSensor eco is equipped with fibre disks that work as a sensor; it does not require

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

WaterControl 01

Application For manually or remotely controlled closing and opening of a water pipe in buildings in response to an event message from the water sensors WaterSensor eco or WaterSensor con. Description WaterControl 01 consists of a shut-off valve and a control unit with power supply and an EnOcean® wireless module. The shut-off valve features a

Akktor Facility Automation

Control software for lighting, blinds and room temperature, for smart metering and for complex heating systems.

Omnio wall mounted transmitter 4-channels WS-102

The Omnio wall mounted transmitter 4-channels WS-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line. To install with screws or adhesive foil. Optional mounting plates allow mounting in different combinations.