e.g. EU, Non-EU Europe, China, Singapure, …

Gateway KNX ENO 636 secure

The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The KNX ENO

Gateway KNX ENO 634

The unit KNX ENO 634 serves as a bidirectional gateway between EnOcean radio devices and the KNX/EIB bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the

Gateway KNX ENO 632

The unit KNX ENO 632 serves as a bidirectional gateway between EnOcean radio devices and the KNX bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the

Gateway KNX ENO 630

The unit KNX ENO 630 serves as a unidirectional gateway between EnOcean radio devices and the KNX/EIB bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators.For EnOcean sensors the device is based on the so-called EnOcean Equipment Profiles (EEP).

PTM 21x – Wireless Switch Module

The PTM 21x is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized. See also design data for the PTM module: www.enocean.com/design-data

CSW -2- E

This is a switch with EnOcean protocol for wireless transmissions. The device transmits signals without a battery by energy harvesting technology. Use this indoor or outdoor, in a wet or dry environment with its internal protection (Rated IPX5) structure. Aesthetic design to meet atmospheres of modern environment. This model is a square and double type.

CSW -1- E

This is a switch with EnOcean protocol for wireless transmissions. The device transmits signals without a battery by energy harvesting technology. Use this indoor or outdoor, in a wet or dry environment with its internal protection (Rated IPX5) structure. Aesthetic design to meet atmospheres of modern environment. This model is a square and single type.

CPI-E(WH)

This is a Passive Infrared Motion detector with EnOcean protocol for wireless transmissions. Use this indoor or outdoor, in a wet or dry environment with its internal protection (Rated IPX5) structure. Auto sensitivity adjustment stabilizes detection capability in a dynamic environment. A combination of a solar panel and a battery enables a reliable operation in a various lighting condition. Aesthetic

CPI-E

This is a Passive Infrared Motion detector with EnOcean protocol for wireless transmissions. Use this indoor or outdoor, in a wet or dry environment with its internal protection (Rated IPX5) structure. Auto sensitivity adjustment stabilizes detection capability in a dynamic environment. A combination of a solar panel and a battery enables a reliable operation in a various lighting condition. Aesthetic design

EiMSIG Window Sensor EnOcean

The EiMSIG Window Sensor EnOcean detects the window states open, closed, and tilted. More information: www.fenstersensor.com