Eltako Wireless 2- or 4-way pushbutton Sweden, without frame, eljo white FT4S-ws

Wireless 2- or 4-way pushbutton 55 x 55 mm Sweden eljo white. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless 2- or 4-way pushbutton without battery or wire, without frame, laser engraved, white FT4CH+2P-w

Wireless 2- or 4-way pushbutton for internal frame dimensions 60 x 60 mm, 15 mm high, Feller Swiss. ­Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker and double ­rocker laser engraved. Also for cover frames from ABB Normelec and Hager.

Eltako Wireless 2- or 4-way pushbutton 45 x 45 mm Belgium, without frame, legrand white, without battery and wire FT4BL-lw

Wireless 2- or 4-way pushbutton 45 x 45 mm Belgium, legrand white. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless 2- or 4-way pushbutton 45 x 45 mm Belgium, without frame, without battery and wire FT4B-

Wireless 2- or 4-way pushbutton 45 x 45 mm Niko ­Belgium. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless central control pushbutton 55 x 55 mm without battery and wire FZT55-wg

Wireless 2-way pushbutton, 80 x 80 mm external dimensions, internal frame dimensions 55 x 55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker laser engraved.

Eltako Water sensor for connection to the wireless transmitter module FSM60B FWS60

Water sensor FWS60 for connection to the wireless transmitter module FSM60B pure white. l x w x h: 60 x 46 x 30 mm (dimensions without screw connection). With 150 cm connecting cable.

Eltako Wireless temperature controller with display and battery FTR86B-ws

Wireless temperature controller white with display for single mounting 86 x 86 x 35 mm. Power supply with battery (lifetime 2 years).

Eltako Wireless outdoor motion/brightness sensor in E-Design65 FABH65S-wg

Wireless outdoor motion/brightness sensor pure white glossy for surface mounting, 84 x 84 x 39 mm, protection class IP54. With solar cell.

EasySens® STC-IoT

The STC-EnOcean IP gateway allows for an easy integration of EasySens® sensors and actuators into the Internet of Things (IoT). The new EnOcean-over-IP gateway communicates JSON streams or RestAPI command lines. The seamless commissioning and configuration can be done through any browser interface. The graphical dataflow-oriented processing of the EnOcean information can be performed by

EasySens® SRE-Repeater UP

The SRE-Repeater UP is especially designed for flush-mounting and used for repeating radio telegrams between EnOcean transmitters and receivers/gateways. The repeater is typically used when transmission range problems occur between transmitter and receiver in an existing installation (e.g. due to walls being pulled in, furniture/cabinets being moved). Level 1, Level 2 and Smart Repeating (rule-based