ems4.ENO1B – Digicontrol

The bidirectional gateway module ems4.ENO1B provides a connection point to EnOcean-compatible switches and sensors.

Eltako High-performance receive antenna FA200 with 200 cm cable

High-performance receive antenna with magnetic base and 200 cm cable.

Eltako Wireless antenna FA250 with 250 cm cable, black or white

Wireless antenna with magnetic base and 250 cm cable, black or white.

Eltako 1- and 2-level wireless repeater FRP61-230V

1 and 2 level wireless repeaters. Only 0.7 watt standby loss.

Eltako 1- and 2-level wireless socket repeater FSRP-230V

1- and 2-level wireless socket repeater. Only 0.7 watt standby loss.

Eltako Wireless position switch, blue, without battery or wire FPE-1

Wireless position switch with energy generator 48 x 32 x 11.5 mm, blue. Generates the power for wireless telegrams itself when the lever is pressed, therefore there is no battery, no connecting wire and no standby loss. When pressing the operating lever a wireless telegram Data (hex) 0x10 is sent and when releasing Data (hex) 0x00 is sent, like a

Eltako Wireless window/door contact with energy generator FTKE-rw

48 x 32 x 11.5 mm, pure white. Also for ­monitoring of drawers and other mobile equipment. Generates the power for wireless telegrams itself when the lever is pressed, therefore there is no battery, no connecting wire and no standby loss. Fixing by gluing, screwing or with mounting brackets BW3. A wireless telegram is sent when a window is opened

Eltako 1- and 2-level outdoor wireless repeater FARP60-230V

Outside wireless repeater 1 and 2 levels, 60 x 46 mm, 30 mm deep. Only 0.7 watt standby loss.

Eltako 1- and 2-level wireless repeater FRP70-230V

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 or FAG55E- is connectable as required.

Eltako Wireless level meter Probare P10

The wireless field test tool Probare P10 is a portable field tester which shows the signal quality of the received EnOcean 868MHz telegrams. Additionally it helps to determine the best place for EnOcean transmitters, receivers or repeaters, it can also help to look if any signals are sent or not.