Wireless Relay Transceiver / Repeater: 20 Amp, 208 Vac – RIBW208B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 208 Vac Power Input, Dry Contact Input, NEMA 1 Housing

Conductivity water sensor WaterSensor BWS

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. in the area of fittings, washing machines, below pipes, etc.). Description WaterSensor BWS consists of a probe with extension cable and a wireless transmitter with an integrated temperature sensor. The probe features a conductivity sensor at the bottom. The energy

Water alarm unit WWG

Application For visual and audible alarms in the event of accumulations of electrically conductive liquids such as rainwater, tap water, fresh water, waste water, cooling water and heating water. Description Alarm unit in wall mounting housing for the detection of even the smallest amounts of water caused by, for example, backflow due to clogged water

Level switche Minimelder/Maximelder

Application Designed to signal minimum or maximum levels of water, heating oil EL, L, M, oil/water mixtures and neutral, non-viscous and non-adhesive liquids in tanks. System owners are alerted when the supply runs low or if there is a hazard of overfilling. Description Minimelder/Maximelder consist of a control unit and a height-adjustable float probe. The

Indoor siren AIS 10

Application The AFRISO AIS 10 indoor siren frightens off trespassers and alerts residents with a loud alarm tone of 85 dB as soon as one of the connected EnOcean devices sends an alarm signal.   Description The indoor siren features a plastic housing for connection to a standard CEE socket and warns persons in the

Wireless smoke alarm ASD 10

For detection of fumes and smoke gas in living spaces. Audible alarm when a defined smoke concentration is exceeded.

Micropelt iTRV – self-powered radiator valve actuator (MVA-004)

NodOn Indoor Temperature & Humidity sensor

Measure and control the temperature and the humidity from a wireless and battery-less sensor Compatible with the EnOcean® worldwide Smart Home & Smart Building protocol, this EnOcean® Temperature & Humidity Sensor will check the temperature and the humidity of the room every 100sec, and will feedback it to your Home Automation Gateway or supervision system

Gateway KNX ENO 636 secure

The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The KNX ENO

Gateway KNX ENO 634

The unit KNX ENO 634 serves as a bidirectional gateway between EnOcean radio devices and the KNX/EIB bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the