WaterSensor eco

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. below pipes, fittings and in the area of washing machines, below bath tubs or dishwashers, in utility rooms or basements). Suitable for water. Description WaterSensor eco is equipped with fibre disks that work as a sensor; it does not require

Omnio Window Handle FG201

The Omnio window handle FG201 is a battery less, maintenance-free and wireless transmitter to monitor the state of windows. It is able to detect the state « window opened », « window closed » and « window tilted ». This handle has no lock and it can be mounted instead of the normal window handle.

Omnio window contact 1-channel FK101

The Omnio window contact FK101 1-channel is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens. The window contact FK101 consists of a transmitter module driven by

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

Temperature Sensor

Powered by a small solar panel. The sensor sends a wireless signal to a receiver whenever the temperature falls out of the preset range. Further information

Wireless Window/Door Sensor

Powered by a small solar panel. An integrated energy store allows unrestricted functionality for several days in total darkness. Further information

Relay Receiver (230V)

230V Relay Receiver. Control incandescent lamps, high voltage halogen lamps, electronic ballast and inductive loads with this 230V receiver. Further information

Pressure Type Leak Detector Europress

Application Pressure type leak detector according to EN 13160 (class I) for safe monitoring of double-walled tanks for the unpressurised storage of water-polluting liquids, AdBlue® (urea solution 32.5 %). The flexible voltage supply (AC 100–240 V) allows for application in a large variety of countries. Description Compact leak detector in a robust wall mounting housing

RF Serial Box (RS-232)

RS-232 Gateway Radio Receiver Further information

Mulit-channel Relay Receiver

Low Voltage Relay Receiver (4 or 8 channels). Receives wireless signals from EnOcean-enabled wireless light switches and wireless sensors. Further information (4 channel) Further information (8 channel)