VL-710 SMART, Control Panel with EnOcean-Interface, 10.1″ resistive touchscreen

The VL-710 SMART is a low-budget HMI with all the interfaces you need for small automation projects: 1x Ethernet 10/100, 1x USB Host (2.0) and a combined serial interface (RS-232/RS-422/RS-485). The EnOcean-Interface is based on the EnOcean USB-Stick, connected to the USB-Host port of the control panel. You can easily realize a smart and comfortable

VL-707 SMART, Control Panel with EnOcean-Interface, 7″ resistive touchscreen

The VL-707 SMART is a low-budget HMI with all the interfaces you need for small automation projects: 1x Ethernet 10/100, 1x USB Host (2.0) and a combined serial interface (RS-232/RS-422/RS-485). The EnOcean-Interface is based on the EnOcean USB-Stick, connected to the USB-Host port of the control panel. You can easily realize a smart and comfortable

Eltako Wireless outdoor siren, white FAS260SA

Wireless outdoor siren white, 260 x 200 x 70 mm, with solar cell and lithium-polymer battery. ­Protection class IP54.

PTM 210J – Wireless Switch Module

The PTM 21x is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized. See also design data for the PTM module: www.enocean.com/design-data

PTM 210U – Wireless Switch Module

The PTM 21x is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of very slim on-wall mountable rocker switches or remote controls.  Optionally, one or two switch rockers or up to four push buttons can be realized. See also design data for the PTM module: www.enocean.com/design-data

CTL-ENOC-EU

The CTL-ENOC-EU wireless dimming controller works with EnOcean-based lighting control devices that require no batteries or external power. Using the Dim-to-Off capability of an Inventronics LED driver eliminated the need for an ac switch or relay for the easiest possible installation and a completely maintenance-free operation. The CTL-ENOC-EU is powered directly from the always-on auxiliary

EnOcean Easyclickpro module Switching, 4-channel, 10A, 2HP

The EnOcean Easyclick switching module receives its telegrams via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick switching module is used to switch lights and other electrical consumers based on a range

EnOcean Easyclickpro room temperature sensor NOVA, pure white, with day/night switch

Easyclick room temperature sensor with solar energy storage for recording temperatures and adjusting local setpoints in individual rooms, with integrated temperature sensor and rotary knob for setpoint adjusts; the batteryless room temperature sensor transmits the measured values to the receiver item no. D 451 FU-E RTR o.T.and the Easyclick modular system. Technical data: Technology: EnOcean

Eltako Wireless temperature+humidity sensor, 75x25x12 mm, with battery (lifetime 5 years) FTFB-

The temperature humidity sensor measures constantly the relative humidity between 0 and 100% (+-5%) and the temperature between -20°C and +60°C (+-0,5°C). It sends a data telegram within 2 minutes if changed in the Eltako wireless network. If there is no change, a status telegram is sent every 10 minutes. Adhesive foil mounting, an adhesive

DINRAIL-RM-ENOCEAN

This DIN rail module can be used with the DINRail pack TaHoma to enable Enocean protocol. It enable you to run Enocean products from your TaHoma and combine them in scenarios and agenda programmation.