Eltako RS485 bus actuator heating/cooling relay FHK14

Heating/cooling relay, 1+1 NO contacts potential free 4 A/250 V AC, with DX technology. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator Staircase off-delay timer FTN14

Staircase off-delay timer, 1 NO contact not potential free 16 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts, switch-off early warning and switchable pushbutton permanent light. Also for energy saving lamps ESL up to 200 Watt. Bidirectional. Only 0.2 watt standby loss. Operation only possible with

Eltako RS485 bus wireless antenna module FAM14

Wireless antenna module for the Eltako RS485 bus with exchangeable antenna. With enclosed power supply FSNT14-12V/12W. Bidirectional. Encrypted ­wireless. Only 0.8 watt stand­by loss. If required, a wireless antenna FA250 or FA200 can be connected.

Eltako RS485 bus multiple gateway with USB-A connection FGW14-USB

Multiple gateway with USB-A connection. Bidirectional. Only 0.3 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako Wireless receiver antenna module FEM

Wireless receiver antenna module for the RS485 sub-bus. Only 0.5 watt standby loss.

Eltako Wireless receiver antenna module surface mounting FEM65-wg, pure white glossy

Wireless receiver antenna module for the RS485 sub-bus. In the housing for surface mounting 84 x 84 x 30 mm into the E-Design switching system. Only 0.5 watt standby loss.

Eltako DALI gateway FDG14

DALI gateway FDG14, bidirectional. Only 1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus multiple gateway FGW14

Multiple Gateway. Bidirectional. Only 0.5 watt standby loss. Operation only possible with the wireless antenna module FAM14.

4 Channel Contact Input Interface

The Echoflex Contact Input Interface offers four wired inputs to interface with Echoflex wireless control devices. Each input has two terminals (+5V, Input) for interfacing with almost any equipment creating a hybrid control solution.

Dual Tech Ceiling Vacancy/Occupancy Sensor

The Echoflex Dual Tech Vacancy/Occupancy Sensor is a solar powered, passive infrared, wireless device. The ceiling mount sensor is optimized for spaces with ceiling heights 2.4-3 m (8-10 ft.) and uses passive infrared (PIR) and audio sensing technologies to ensure positive occupant detection, so lights stay ON when needed. The Vacancy Sensor (RVS-D) and Occupancy