Eltako RS485 bus actuator 2-channel impulse switch FSR14-2x

2-channel impulse switch with integrated relay function, 1+1 NO contacts potential free 16 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps 2000 watts, with DX technology. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator for shading elements and roller shutters 230 V motor FSB14

Switch actuator for shading elements and roller shutters with 2 channels for two 230 V motors. 2+2 NO contact 4 A/250 V AC, potential free from power supply 12 V. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus meter collector F3Z14D

Wireless meter concentrator for electricity, gas and water meters. For 3 S0 interfaces and/or 3 AFZ scanners, only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako Wireless receiver antenna module FEM

Wireless receiver antenna module for the RS485 sub-bus. Only 0.5 watt standby loss.

Eltako DALI gateway FDG14

DALI gateway FDG14, bidirectional. Only 1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus wireless antenna module FAM14

Wireless antenna module for the Eltako RS485 bus with exchangeable antenna. With enclosed power supply FSNT14-12V/12W. Bidirectional. Encrypted ­wireless. Only 0.8 watt stand­by loss. If required, a wireless antenna FA250 or FA200 can be connected.

Eltako RS485 bus multiple gateway FGW14

Multiple Gateway. Bidirectional. Only 0.5 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus multiple gateway with USB-A connection FGW14-USB

Multiple gateway with USB-A connection. Bidirectional. Only 0.3 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako Wireless receiver antenna module surface mounting FEM65-wg, pure white glossy

Wireless receiver antenna module for the RS485 sub-bus. In the housing for surface mounting 84 x 84 x 30 mm into the E-Design switching system. Only 0.5 watt standby loss.

4 Channel Contact Input Interface

The Echoflex Contact Input Interface offers four wired inputs to interface with Echoflex wireless control devices. Each input has two terminals (+5V, Input) for interfacing with almost any equipment creating a hybrid control solution.