Wireless Relay Receiver / Repeater: 5 Amp, 208-277 Vac – RIBW02C-EN3

EnOcean® 902 MHz Wireless Relay, Receiver / Repeater, 5 Amp SPST-N/O, 208-277 Vac Power Input, NEMA 1 Housing

Wireless Relay Receiver / Repeater: 5 Amp, 120 Vac – RIBW01C-EN3

EnOcean® 902 MHz Wireless Relay, Receiver / Repeater, 5 Amp SPST-N/O, 120 Vac Power Input, NEMA 1 Housing

Wireless Relay Transceiver / Repeater: 20 Amp, 24 Vac/dc – RIBW24B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 24 Vac/dc Power Input, Dry Contact Input, NEMA 1 Housing

Wireless Relay Transceiver / Repeater: 20 Amp, 277 Vac – RIBW277B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 277 Vac Power Input, Dry Contact Input, NEMA 1 Housing

Wireless Relay Transceiver / Repeater: 20 Amp, 240 Vac – RIBW240B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 240 Vac Power Input, Dry Contact Input, NEMA 1 Housing

Wireless Relay Transceiver / Repeater: 20 Amp, 120 Vac – RIBW01B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 120 Vac Power Input, Dry Contact Input, NEMA 1 Housing

Wireless Relay Transceiver / Repeater: 20 Amp, 208 Vac – RIBW208B-EN3

EnOcean® 902 MHz Wireless Relay, Transceiver / Repeater, 20 Amp SPDT, 208 Vac Power Input, Dry Contact Input, NEMA 1 Housing

Conductivity water sensor WaterSensor BWS

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. in the area of fittings, washing machines, below pipes, etc.). Description WaterSensor BWS consists of a probe with extension cable and a wireless transmitter with an integrated temperature sensor. The probe features a conductivity sensor at the bottom. The energy

Water alarm unit WWG

Application For visual and audible alarms in the event of accumulations of electrically conductive liquids such as rainwater, tap water, fresh water, waste water, cooling water and heating water. Description Alarm unit in wall mounting housing for the detection of even the smallest amounts of water caused by, for example, backflow due to clogged water

Level switche Minimelder/Maximelder

Application Designed to signal minimum or maximum levels of water, heating oil EL, L, M, oil/water mixtures and neutral, non-viscous and non-adhesive liquids in tanks. System owners are alerted when the supply runs low or if there is a hazard of overfilling. Description Minimelder/Maximelder consist of a control unit and a height-adjustable float probe. The