Eltako Wireless tubular motor, torque 10 Nm, speed 14/min, whisper mode 5/min FRM60M10

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 10 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 466 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless tubular motor, torque 20 Nm, speed 14/min, whisper mode 5/min FRM60M20

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 20 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 526 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless multi sensor in E-Design55 FMS55ESB-

Wireless multi sensor for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. With integrated solar cell and battery CR 1632 (not included in the scope of supply).

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

Eltako Wireless pushbutton tracker, without wire FTTB

Wireless pushbutton tracker with battery (lifetime 5-8 years). 55 x 44 mm, 15 mm high. Weighs only 20 grams. The wireless pushbutton tracker FTTB has a blue pushbutton to send normal pushbutton telegrams. After opening the housing (grasp into the joint and prise apart), switch the tracker on by shifting the slide switch to the w position. The sensor

Eltako Wireless window/door contact FFKB-

75 x 25 x 12 mm, with battery ­(lifetime 7 years). Magnet 37 x 10 x 6 mm. On opening and closing, the related tele­gram is send twice in short succession. The current status telegram is sent cyclically every approx. 8 minutes. ­Attach by bonding.

Eltako Wireless keyswitch, without wire, aluminium/black FSTAP-al/sz

Wireless keyswitch for surface mounting 70 x 70 x 43 mm. Die cast aluminium, black front, protection class IP44. Euro profile cylinder lock with 2 keys. Battery lifetime 3-5 years. No standby loss. No external power supply required, so no connecting wire. An internal 3 V CR2032 battery supplies power for ­several years. To change the battery, open the housing as

Eltako Wireless bell pushbutton without battery or wire FKD-

Wireless bell pushbutton 80 x 40 x 15 mm with energy generator. Protection class IP54. Generates the energy for radio telegrams by pushing the button, therefore without connecting cable and no stand-by loss. Labeling field 43 x 12 mm. For example for Dymo label tape 9 mm and 12 mm. The radio bell pushbutton transmits 1 signal that can be evaluated like a 1-way wireless

Eltako Wireless 4-way handheld transmitter without battery or wire, with double rocker, aluminium/anthracite-soft FHS4-al/anso

Wireless 4-way handheld transmitter with rocker aluminium/anthracite-soft, 49 x 47 mm, 16 mm high. Weighs only 37 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.

Eltako Wireless 2-way handheld transmitter without battery or wire, with rocker, aluminium/anthracite-soft FHS2-al/anso

Wireless 2-way handheld transmitter with rocker aluminium/anthracite-soft, 49 x 47 mm, 16 mm high. Weighs only 37 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.