Eltako Wireless signal generator adapter FSSG-230V
Wireless signal generator adapter FSSG-230V 10A/250V AC. 100x55x45mm (measure ments without plug), pure white glossy. Additional an internal acoustic signal generator with a volume of at least 80dB will fl ash a load connected to the plug. 230V incandescent lamps and halogen lamps 1000W, ESL and 230V LED lamps up to 200W. Standby loss only
EiMSIG Security System (3rd gen.)
The EiMSIG Security System is HomeKit certified. The particularly intuitive operating concept and the protection of the building’s outer shell have already convinced more than 10,000 customers. The Eimsig window and universal sensors are supported with the EnOcean radio standard and other Eimsig components. The system is suitable for old and new buildings. Security at
NodOn Fil Pilote Module
EnOcean Pilot Wire Heating Module is easy to install on all electric heaters with pilot wire to turn it connected and smart. It is EnOcean 3.0 certified and can be controlled with a controller, a door/window opening or motion sensor, or a compatible home automation gateway. Thanks to its 6 modes (Comfort, Comfort -1°C, Comfort
AL-512-00-868 EnoDisc® / CE, EnOcean radio receiver and transmitter
The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®
PTM 210 – Wireless Switch Module
The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.
PTM 215 – Wireless Switch Module with NFC
PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four
ESRPU/ EDRPU – Wireless Switch (902 MHz)
Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.
EHSMU – HVAC Setback Module (902 MHz)
The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC
Ermine Occupancy Sensor
Near field, around 5 meters, Occupancy sensor. Battery powered, but it will last more than 10 years.



Deutsch
简体中文
Français
Italiano
日本語 









